Your Subtitle text
Call us today 306-540-5187
PebbleStone FAQ'S

1. How long does Pebblestone take to install? 
Answer: It normally takes about one day. It depends on the condition and size of the job.

2. How long until you can walk on it?
Answer: You may begin to walk on it between 24 - 36 hours.

3. What kind of surface can Pebblestone be installed on?
Answer: Concrete, wood and metal.

4. What do you use for edging around patios?
Answer: You can use metal or plastic tile edging purchased at Lowes or Home Depot.

5. Is Pebblestone slippery?
Answer: We sell an additive to add to the mix to make the surface as anti-skid as possible. You only need the anti slip on stairs.

6. How thick is the Pebblestone installed?
Answer: Depending on the condition of the surface it can be installed 3/8 - 1/2 or thicker.

7. Can you install Pebblestone in a shower or in a bathroom? Answer: Yes. We recommend installing a rubber membrane on the surface first, then install the Pebblestone.

8. How do you clean Pebblestone?
Answer: A shower should be cleaned once a week with 50/50 bleach and water. Or you can steam clean and vacuum on the inside, or pressure wash and hose on the outside. If its around the pool, use 50/50 chlorine once a month. 

9. Reseal
You need to reseal your Pebblestone every year.

10. Can you use Pebblestone on the bottom of the pool?
No the chemical reaction will whiten the stone. You can how ever use it around the outside of the pool since the Pebblestone is not covered in the water 24/7.

11. Is Pebblestone soft to walk on?
The answer is yes it is very good for your feet. Some customers have said it is therapeutic


ATTENTION PHOENIX CUSTOMERS   IF YOUR PEBBLESTONE PRODUCT WAS NOT INSTALLED BY US AND NEEDS RECOATING WITH EPOXY THE EPOXY WILL ONLY WORK IF THE STONES ARE NOT LOOSE. IF THEY ARE LOOSE THE WHOLE SURFACE WILL REQUIRE A NEW COAT OF STONES APPLIED OVER TOP AT $6.50 A SQ FT. “ WE WILL SELL YOU THE STONE TO DO YOURSELF OR THE EPOXY IF YOU DO NOT WANT TO PAY OUR RATE. THANK YOU

Website Builder